RELOOP RMX 90 DVS





DIGITAL CLUB MIXER WITH DVS AUDIO INTERFACE FOR SERATO DJ

The Reloop RMX-90 DVS is a 4-channel club mixer with integrated 8 in/8 out audio interface. When developing this mixer, a strong emphasis was placed on clear and powerful sound characteristics. This has been achieved through its fully digital sound architecture and high-resolution 24-bit audio interface. Experienced DJs will be mixing in no time thanks to the intuitive club mixer layout, 3 band EQ (with classic & isolator modes) and per-channel filters. SERATO DJ & DVS ENABLED

The RMX-90 DVS unlocks the full version of Serato DJ, including DVS control. Serato’s advanced NoiseMap™ technology combined with the 24-bit USB interface allows for extremely low latency playback and precise record manipulation. Setup is as easy as plug-n-play and DVS can be used immediately after hook-up. The RMX-90 DVS also comes with 2 Serato NoiseMap™ control vinyl records to start spinning instantly.

ON-BOARD FX UNIT WITH VISUAL FEEDBACK

In order to dynamically remix your music, the RMX-90 DVS is equipped with a Beat FX unit that utilises 12 effects in studio quality and are individually assignable. Beat FX can be synchronized via the BPM Adjust encoder and the two high-resolution digital displays give visual feedback of FX parameters, routing and more.

EXTENSIVE CONFIGURATION OPTIONS

The mixer setup utility contains various user-definable functions and settings including filter resonance, EQ frequency (high, low) and audio routing options for the audio interface and booth output. The crossfader and line fader curves can be adjusted and scratch DJs & turntablists can choose to upgrade the user-replaceable crossfader with a contactless RMX Innofader by Audio Innovate.

HIGH-QUALITY CONSTRUCTION

The RMX-90 DVS complies with the highest quality standards and its construction stands out due to a sturdy build inside the metal housing where the bolted pots have been fixed in. The surface of the RMX-90 DVS is varnished in deep black metallic finish and is both durable and visually appealing.

VERSATILE INTEGRATION

All elements on the RMX-90 DVS are MIDI-assignable and can be used to control any MIDI capable software. The mixer’s rear panel contains an active USB hub, which can be used for the connection of further USB devices such as storage media or MIDI controllers. Connection to the software is via a high-retention USB 2.0 port, which is especially durable, guaranteeing protection against unwanted cable malfunctions and tear-offs.
The RMX-90 DVS combines the advantages of an analogue club mixer with the endless possibilities of the digital vinyl world.

MIX DIGITAL, ANALOGUE STYLE

TECHNICAL DATA

                 Frequency range: 20 Hz – 20 kHz
                 Inputs: 7 line, 2 phone, 2 mic
                Outputs: master XLR (balanced), master RCA (unbalanced), booth 6.3 mm jack
                 record RCA (unbalanced), headphones 3.5/6.3 mm jacks
                 EQ range classic at 70Hz, 1 kHz, 13 kHz: -26 dB/+9 dB
                 EQ range isolator at 70 Hz, 1 kHz, 13 kHz: -∞ dB (total kill)/+9 dB
                 EQ range mic at 100 Hz, 10 kHz: -12 dB/+ 12dB
                 Dimensions: 322 x 387 x 107.5 mm
                 Weight: 7 kg

FEATURES

                          4+1-channel DJ club mixer
                          8 in/8 out DVS audio interface, 24 bit for Serato DJ
                          Serato DJ Plug'n'Play: full version incl. DVS Expansion Pack
                          Digital architecture with extensive adjustment possibilities
                          3-band EQ with adjustable behaviour, classic/kill
                          Sound filter, bi-polar filter unit with LPF and HPF
                          High-quality surface in deep black metallic
                          Sturdy construciton: metal housing, screwed knobs
                          Beat FX unit with 12 effects in studio quality: Flanger, Delay, Echo, Reverb, Transformer,                               Pitch Shift, Loop Roll, Reverse Loop, Noise, Bitcrusher, Gate, Tape Delay
                          Two digital displays for visualization of parameter changes
                          Extensive setup menu, among others:
                          - Filter resonance
                          - EQ frequency range (low, high)
                          - Audio interface routing
                          - Booth output zone routing (matrix)
                          - CUE solo option
                          RMX innoFADER compatible
                          Adjustable linefader and crossfader curves
                          MIDI-compatible control elements
                          Active USB hub for the connection of further USB devices
                          High-retention USB 2.0 port, especially durable
                          Fader-start via 3.5 mm control cable
                          Kensington lock to secure the device
 
 


Il prodotto è stato inserito correttamente nel carrello.
E' stata raggiunta la quantità massima acquistabile per questo prodotto.
- registrati ora
- recupera password
- reinvia email di conferma



Accedi con facebook:





WIMPY MUSIC SNC - Viale Monza 6 - 20127 - Milano - P.I. 08179160158

Partita IVA: 08179160158
Realizzato con espressito